Hardwood Floor Refinishing and Installation in Acworth, GA
Refinish, Repair or Replace
Most worn floors in Acworth can be saved. We measure how much wood is left before recommending anything, and if you don't need new floors, we won't quote them.
Get Help With Your Floors in Acworth
Hardwood Floor Refinishing in Acworth
Wood left above the tongue
A solid floor can be sanded several times in its life, but each sand takes wood, and a floor sanded hard before may have little left. We measure what's above the tongue before quoting. Nail heads at the surface and gaps at the tongue mean it's at its limit.
Where there's wood to work with, a floor that looks rough usually comes back close to new. We sand in three grits to bare wood, hand-work the edges, sample stain on your floor and finish in three coats.
Hardwood Floor Installation in Acworth
When the floor is past saving
When there's no sand left, or damage runs across the room, new flooring is the better spend. Above grade over a wood subfloor, that's solid three-quarter-inch hardwood. On a slab or in a basement, it's engineered.
The subfloor is checked for flatness and moisture and leveled before a board goes down. Removal and haul-away are in the quote.
Hardwood Floor Projects
Photographed on our jobs
What to Expect During Your Floor Project
Before you book
Do we have to leave the house?
Usually not. We work in zones so a bedroom, a bathroom and an exit stay reachable, and most families stay home. Pets need to be out of the work area while finish is going down.
How much dust and smell?
Dust is captured at the sander and vented outside. Edge and hand work still make some, so it isn't dust-free, and we won't say it is. Water-based finishes have little odor; oil-based has more. We'll tell you which we're using and why.
How long until we can use the floor?
Most refinishes take three to five days, plus a day if you're changing the stain color. Furniture goes back 48 to 72 hours after the final coat. Your written schedule shows the dates room by room.
Who moves the furniture?
What’s in the written price?
We measure in your home and leave a written price before we go. Repairs, stain, stairs and removal are listed as separate lines, so you can compare quotes line for line. There's no deposit at the estimate. Once you accept, a 50% deposit orders material and holds your dates.
What if something goes wrong?
Our labor carries a lifetime warranty, in writing on the warranty page. We're insured and a licensed Georgia general contractor (RBCO008240), so a problem under the floor doesn't stop at the flooring.
What Homeowners Say About TriArt
In their words
Questions Roswell Homeowners Ask
Before you call
Is it cheaper to refinish than replace?
Almost always, when there's wood left. A full refinish runs $2.75 to $5.00 per square foot. New flooring adds material, removal and subfloor prep.
How can I tell if water got under my floor?
Cupped boards, dark seams, soft spots or a musty smell near the damage. Send a photo, and we'll check the subfloor in person before quoting.
Can you match new boards to my existing floor?
Usually. We match species and width, then refinish the room together. If a close match isn't possible, you'll know at the walkthrough.
How much does it cost to refinish hardwood floors in Acworth?
$2.75 to $5.00 per square foot for a full sand and refinish. Repairs start at $475. Stain changes and stairs move the number, and it's all itemized in writing.