Hardwood Floor Refinishing and Installation in Duluth, GA
See the Wood Before You Choose
Replacing laminate, carpet or a worn-out floor? TriArt installs and refinishes hardwood across Duluth. You choose the species, width and finish from real boards at our Alpharetta showroom.
Get Help With Your Floors in Duluth
Hardwood Floor Installation in Duluth
Species, width, finish
Three choices shape a new floor, and seeing them side by side settles most of them:
Red oak or white oak. Red oak is warmer, with a pink undertone that pushes grays toward brown. White oak is cooler, slightly harder, and takes grays and naturals cleanly.
Strip or wide plank. Narrow strip reads traditional. Wide plank reads modern and shows more grain per board.
Prefinished or site-finished. Prefinished goes in faster and the room is usable sooner. Site-finished is sanded flat after install, sealed edge to edge, and takes any stain.
If you're replacing laminate or floating LVP, the old floor usually comes up cleanly, but it can hide an uneven subfloor that real hardwood won't tolerate. We level any dips before a board goes down, because wood over dips squeaks within a few years.
Hardwood Floor Refinishing and Repair in Duluth
When the floor you have is worth keeping
If there's hardwood already down, refinishing usually costs far less than replacing it. We sand in three grits to bare wood, sample stain on your floor and finish in three coats, and if the finish is only dull, a recoat may be all it needs. Damage from a move, like a gouge from a dresser or boards scraped at a doorway, gets the same treatment on a smaller scale. We replace the damaged boards with matched ones and blend them into the recoat or refinish, so one bad spot doesn't mean redoing the floor.
Hardwood Floor Projects
Photographed on our jobs
What to Expect During Your Floor Project
Before you book
Do we have to leave the house?
Usually not. We work in zones so a bedroom, a bathroom and an exit stay reachable, and most families stay home. Pets need to be out of the work area while finish is going down.
How much dust and smell?
Dust is captured at the sander and vented outside. Edge and hand work still make some, so it isn't dust-free, and we won't say it is. Water-based finishes have little odor; oil-based has more. We'll tell you which we're using and why.
How long until we can use the floor?
Most refinishes take three to five days, plus a day if you're changing the stain color. Furniture goes back 48 to 72 hours after the final coat. Your written schedule shows the dates room by room.
Who moves the furniture?
What’s in the written price?
We measure in your home and leave a written price before we go. Repairs, stain, stairs and removal are listed as separate lines, so you can compare quotes line for line. There's no deposit at the estimate. Once you accept, a 50% deposit orders material and holds your dates.
What if something goes wrong?
Our labor carries a lifetime warranty, in writing on the warranty page. We're insured and a licensed Georgia general contractor (RBCO008240), so a problem under the floor doesn't stop at the flooring.
What Homeowners Say About TriArt
In their words
Questions Roswell Homeowners Ask
Before you call
Can hardwood go over my old laminate?
No. Laminate and floating LVP come out so the hardwood can be fastened to the subfloor, and so we can check and level what's underneath. See nail-down, glue-down or floating.
How much does new hardwood cost?
It depends mostly on the material. Our installation cost guide explains what moves the price, and you get a written quote with material and labor listed separately.
How long does installation take?
Most main levels take three to five days, depending on square footage and how much leveling the subfloor needs.
Can I visit the showroom?
Yes. It's at 1815 Hembree Road, Suite 210, in Alpharetta, open weekdays 8 to 5 by appointment.